RFID 1-Wire readers work perfectly in such cases
1. Immobilizer - prevent anyone from starting the vehicle without scanning an RFID tag first.
2. Authorized driving - keep track of who is driving your vehicle according to the RFID tag they use to authenticate themselves.
3. Auto Geofencing – gives ability to know when car leaves customized areas without RFID authorization.
Instruction:
IS630/830-1W is Suoma developed 125KHz /13.56Mhz wall-mounted card reader with one wire interface .
Protocol:
All 1-Wire devices, including iButton devices, contain an 8-byte unique registration number.
The computation begins with the MSB of the 64-bit, This 1-Wire Data consists of an 8-bit CRC, a unique 48-bit serial number and an 8- bit family code.The family code is fixed 0x01
Features:
- 125Khz frequency/13.56Mhz
- One wire communication
- Can prevent damage and wind and rain, encapsulated in a special material. May be suitable for installation in a wide variety of indoor and outdoor environments.
- Card reader accepts 9-12 DC voltage, can be used with almost all the controllers on the market.
Model Description:
| Order Model | Interface |
| IS630-1W | One wire, 125 |
| IS830-1W | One wire, 13.56Mhz |
Parameter:
| Frequency | 125KHz/13.56Mhz |
| Support card | EM4200,TK4100 /MI-FARE S50,S70/F08 |
| Interface | 1-Wire Bus |
| Read Distance | > 5cm(Card reading distance depends on card packaging and surroundings) |
| Indicator | A LED light,A buzzer |
| Power Supply | DC +9V ~ +12V(±5%) |
| Current | <60mA |
| Baud Rate | 9600 |
| Storage Temperature | -20℃~70℃ |
| Operating Temperature | -10℃~50℃ |
| Dimension | dia30mm |
| Humidity | 0 ~ 95% |
Wiring definition:
| RED | DC 12V |
| BLACK | GND |
| GREEN | 1-Wire(Data in/out) |
Application:
Vehicle management
Fleet management
School bus tracking system
Track tracking system
Driver ID management
-
To send a binary number "1", the bus master sends a very brief (1–15 μs) low pulse. To send a binary number "0", the master sends a 60 μs low pulse. The falling (negative) edge of the pulse is used to start a monostable multivibrator in the slave device. The multivibrator in the slave reads the data line about 30 μs after the falling edge. The slave's internal timer is an inexpensive analog timer. It has analog tolerances that affect its timing accuracy. Therefore, the pulses are calculated to be within margins. Therefore, the "0" pulses have to be 60 μs long, and the "1" pulses can't be longer than 15 μs.
FAQ
Q1. Can I have a sample order for rfid reader/module?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 1-3 days for Sample preparing ,5-10 working days for mass production.
Q3. Do you have any MOQ limit for rfid reader/module order?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. There are some cheaper opitions for certain area which takes more time like 8-20 days, like Express Southeast Asia,Middle East Express,ARAMEX,South America Express.
Q5. How can I pay for an order?
A: We can accept TT(telegraphic transfer), western union, paypal, alipay, wechat and online order.
Product Tags:
|
|
Vehicle Tracking System RFID Reader with One Wire Communication and BI-color LED Indicator Images
|
